GARAGE EQUIPMENT

Fully automatic tire changer
Under the name "automatic" there is a system of pneumatic actuators responsible for: forward and backward operation of the tire changer column without the use of force, controlled by a pedal. In addition, the machine allows not only to set the mounting foot at an optimal distance vertically and horizontally from the rim edge, but also to block the mounting foot in a pre-set position during the movement of the entire column, thanks to which we can replace the tires of the entire set of wheels without interfering with each other. settings.

Greater possibilities
By increasing the surface of the stage, the tire changer allows you to work with really large wheels. From now on, you can change tires in wheels with a rim diameter of up to 26 "and a width of up to 406 mm. In addition, the machine is characterized by:

• two-speed motor with a switch in the housing
• bigger and stronger hammer of the tire changer with an adjustable stop
• larger diameter of the piston up to 200mm!

Trouble-free operation
The high-quality workmanship of the assembly table and jaws guarantees long and trouble-free operation, all you need to do is carry out routine maintenance. The tight pneumatic system is equipped with air distributors and quick couplings from well-known manufacturers of pneumatic accessories.

Rich equipment
See what is included in the equipment of the fitting:
- 4 plastic jaws
- Plastic covers for the foot (roller and slide)
- 50 cm mounting bucket - Inflating
gun with pressure gauge
- Air treatment unit: air dehydrator and oiler

Convenience of operations
You can change the position of the hammer at any time - as standard, the machine is equipped with 2 slots, so you can easily change the element. The rollers with bearings provide much better service life and work comfort - the rollers do not jam on the tire. A contoured bead improves the tire's slippage. The two rotational speeds of the table will allow you to easily adjust the machine's capabilities to your needs.

Purchase for years!
The machine is made in a very careful way, there is no play or leaks here. In turn, the powder coating of the housing, additionally secured with a primer, will ensure that the product will maintain its perfect appearance for many years.


Producer : REDATS
Type : machine
Power supply : 3-phase (400V)
Range of rims internally : 14 "- 26"
Range of rims externally : 12 "- 23"
Maximum wheel diameter : 1143 mm
Maximum wheel width : 406 mm
Engine power : 1st gear: 0.75 kW, 2nd gear: 1.1 kW
Hammer power : 2500 kg
Working pressure : 8 - 10 Bar
Noise Level : <75 dB
Maximum table torque : 1078 Nm
Table rotation speed : 1st gear: 6 rpm, 2nd gear: 12 rpm
Runflat / low profile tires : no
Arm and foot lock system : Pneumatic (tilt back)
Application : passenger cars and vans
Standard equipment : Filtering and lubricating unit: Naolejacz + dehydrator, Inflating gun with pressure gauge, Plastic overlays on the foot (roller and glide), Plastic covers for jaws 4 pcs., Assembly bucket, Container for accessories
Weight : approx. 270 kg
Dimensions (H x D x W) : 195 x 130 x 130 cm
Warranty : 24 months

Suggested

Tyre changer for trucks 141-LKW

Tyre changer for trucks 151-LKW